In the Steel Joints add-on, you can use not only the usual member types of "Beam", "Truss", and so on, but also the member type of "Result Beam", as well as cross-sections from surface elements. You should select a suitable cross-section for the result beam and then define any member openings in the surface model using the member editor.
Did you find this video helpful?
► Let us know in the comments if you like this video.
E-learning videos:
► RFEM 6 for beginners: https://www.youtube.com/playlist?list=PL8ofwN6MZdI_JsyH5qaHA1itUfXa7w8sR
► Programming with RFEM 6 and Python: https://www.youtube.com/playlist?list=PLx7dtCtXeyHWXCU3Q6NMHkKwRgWgLb-Da
► RFEM 6 tutorial with Rhino & Grasshopper: https://www.youtube.com/playlist?list=PLx7dtCtXeyHX5toT2EXyV5nvc0E0fHWKJ
Further Information About Video:
► Dlubal Software Website: https://www.dlubal.com/en-US/support-and-learning/learning/videos/005119
Download a free trial version of our programs now:
► Download free 90-day trial: https://www.dlubal.com/en-US/downloads-and-information/free-trial-versions/download-trial-versions
Take advantage of our free support. Do you have any questions?
► Frequently Asked Questions (FAQ): https://www.dlubal.com/en/support-and-learning/support/faq
► Ask an individual question: https://www.dlubal.com/en/support-and-learning/support/ask-individual-question
► Knowledge Base: https://www.dlubal.com/en-US/support-and-learning/support/knowledge-base
Follow us and stay up to date:
► Subscribe to the Dlubal YouTube Channel: https://www.youtube.com/user/DlubalEN?sub_confirmation=1
► Instagram: https://www.instagram.com/dlubal_software/
► Are you also on Facebook? Follow us here: https://www.facebook.com/dlubal.software.english
Keywords
#SteelJoint #Design #MemberType #ResultBeam #Surface #Section
,Civil Engineer,Construction,Dlubal Software,Dlubal Tutorial,Dlubal Webinar,FAQ,Free Webinar,RFEM 6,RSTAB 9,Structural Analysis,Structural Design,Structural Engineer,Structural Engineering,Support,User Questions,Webinar,Webinar on Dlubal Software,_bBD7Gl57e0,UCHf0NE9OLzjLHTnInUzRL_A, Knowledge, channel_UCHf0NE9OLzjLHTnInUzRL_A, video__bBD7Gl57e0,In this webinar, we will address commonly asked questions recently sent to the Dlubal support team regarding RFEM 6 and RSTAB 9.
Time Schedule:
00:00 Introduction
01:15 How can I exclude objects from the design of individual combinations?
04:20 How can I create a pre-deformed FE mesh like I used to in RF-IMP?
11:30 Can I automatically consider the stiffnesses of steel joints in the global RFEM model?
18:00 How can I adjust the stiffness of objects?
23:10 How can I analyze a pile?
28:35 How can I use combinatorics for road bridges?
More on Dlubal Software Website:
► https://www.dlubal.com/en-US/support-and-learning/learning/videos/005167
Watch our webinars and videos to improve your knowledge of Dlubal software and find new ways to work more efficiently.
► Webinars: https://www.dlubal.com/en-US/support-and-learning/learning/webinars
► Videos: https://www.dlubal.com/en-US/support-and-learning/learning/videos
Did you find this video helpful?
► Let us know in the comments if you like this video.
E-Learning videos:
► RFEM 6 for Beginners: https://www.youtube.com/playlist?list=PL8ofwN6MZdI_JsyH5qaHA1itUfXa7w8sR
► Programming with RFEM 6 and Python: https://www.youtube.com/playlist?list=PL8ofwN6MZdI85JiM-9rcL_x47muHsoqR6
► RFEM 6 Tutorial with Rhino & Grasshopper: https://www.youtube.com/playlist?list=PL8ofwN6MZdI9kCA-3urTuraG1HW1jK3MO
Take advantage of our free support. Do you have any questions?
► Frequently Asked Questions (FAQ): https://www.dlubal.com/en/support-and-learning/support/faq
► Ask an individual question: https://www.dlubal.com/en/support-and-learning/support/ask-individual-question
► Knowledge Base: https://www.dlubal.com/en-US/support-and-learning/support/knowledge-base
Follow us and stay up to date:
► Subscribe to the Dlubal YouTube Channel: https://www.youtube.com/user/DlubalEN?sub_confirmation=1
► Instagram: https://www.instagram.com/dlubal_software/
► Are you also on Facebook? Follow us here: https://www.facebook.com/dlubal.software.english
Keywords
#DlubalWebinar #FreeWebinar #Webinar #RFEM6 #RSTAB9 #UserQuestions #Support #FAQ #WebinarOnDlubalSoftware #DlubalTutorial #Construction #StructuralEngineering #CivilEngineer #StructuralDesign #StructuralEngineer #StructuralAnalysis #DlubalSoftware
,ASCE 7,Dlubal FAQ,Earthquake,FAQ about Dlubal Software,Frequently Asked Question,Load combination,Question and Answer to Dlubal Software,Redundancy factor,Seismic load case,EoKd1VyVmc8,UCHf0NE9OLzjLHTnInUzRL_A, Knowledge, channel_UCHf0NE9OLzjLHTnInUzRL_A, video_EoKd1VyVmc8,Question:
How do I include the redundancy factor(s) ρ in the ASCE 7 load combinations?
Answer:
1) Open the ''Load Cases & Combinations'' dialog box. Under the ''Base'' tab, select the ''Edit Parameters of Edition'' option. The default values are set to 1.0 (Image 01)
► Image | Redundancy Factors https://www.dlubal.com/en/img/034340
Case A: To apply the same factor in the X and Y directions, use the generic (no direction) redundancy factor, ρ.
Case B: To apply different factors in each direction, use the redundancy factors, ρ-x and ρ-y. The generic factor ρ in the first row is not used.
2) Under the ''Load Cases'' tab, create a seismic load case with Qe as the ''Action Category''. Next, select the ''Additional Settings'' tab and pick the direction (Image 02)
► Image | Create Seismic Load Case https://www.dlubal.com/en/img/033443
3) Under the ''Design Situations'' tab, select the applicable seismic Design Situation Type. Both LRFD and ASD methods are available (Image 03)
► Image | Seismic Design Situations https://www.dlubal.com/en/img/034342
'''Note:''' When neither or both directions are activated under the '''same''' load case, the generic redundancy factor ρ is used. Create a '''separate''' load case to apply the individual factors, ρ-x and ρ-y.
4) In the ''Load Combinations'' tab, verify that the correct factor(s) have been applied. Factors are also shown in the ''Result Combinations'' tab, if applicable. Click OK to exit (Image 04)
► Image | Load Combination Including Redundancy Factor https://www.dlubal.com/en/img/034343
For more information, go to the FAQ page:
► https://www.dlubal.com/en-us/support-and-learning/support/faq/005319
Did you find this video helpful?
► Let us know in the comments if you like this video.
E-learning videos:
► RFEM 6 for beginners: https://www.youtube.com/playlist?list=PL8ofwN6MZdI_JsyH5qaHA1itUfXa7w8sR
► Programming with RFEM 6 and Python: https://www.youtube.com/playlist?list=PLx7dtCtXeyHWXCU3Q6NMHkKwRgWgLb-Da
► RFEM 6 tutorial with Rhino & Grasshopper: https://www.youtube.com/playlist?list=PLx7dtCtXeyHX5toT2EXyV5nvc0E0fHWKJ
Take advantage of our free support. Do you have any questions?
► Frequently Asked Questions (FAQ): https://www.dlubal.com/en/support-and-learning/support/faq
► Ask an individual question: https://www.dlubal.com/en/support-and-learning/support/ask-individual-question
► Knowledge Base: https://www.dlubal.com/en-US/support-and-learning/support/knowledge-base
Follow us and stay up to date:
► Subscribe to the Dlubal YouTube Channel: https://www.youtube.com/user/DlubalEN?sub_confirmation=1
► Instagram: https://www.instagram.com/dlubal_software/
► Are you also on Facebook? Follow us here: https://www.facebook.com/dlubal.software.english
Keywords
#DlubalFAQ #RedundancyFactor #ASCE7 #LoadCombination #SeismicLoadCase #Earthquake #FrequentlyAskedQuestion #FAQAboutDlubalSoftware #QuestionAndAnswerToDlubalSoftware
,ASCE 7,Design situation,Dlubal FAQ,Earthquake,FAQ about Dlubal Software,Frequently Asked Question,Limit state type,Load combination,Overstrength factor,Question and Answer to Dlubal Software,Seismic load case,L5GgIdoPX-g,UCHf0NE9OLzjLHTnInUzRL_A, Knowledge, channel_UCHf0NE9OLzjLHTnInUzRL_A, video_L5GgIdoPX-g,Question:
How do I include the overstrength factor(s) Ω-o in the ASCE 7 load combinations?
Answer:
1) Open the ''Load Cases & Combinations'' dialog box. Under the ''Base'' tab, select the ''Edit Parameters of Edition'' option. The default values are set to 2.0 (Image 01)
► Image | Edit Parameters of Edition https://www.dlubal.com/en/img/033442
Case A: To apply the same factor in the X and Y directions, use the generic (no direction) overstrength factor Ω-o.
Case B: To apply different factors in each direction, use the overstrength factors X and Y, Ω-o,x and Ω-o,y. The generic factor Ω-o in the first row is not used.
2) Under the ''Load Cases'' tab, create a seismic load case with Qe as the ''Action Category''. Next, select the ''Additional Settings'' tab and pick the direction (Image 02)
► Image | Create Seismic Load Case https://www.dlubal.com/en/img/033443
'''Note:''' When neither or both directions are activated under the '''same''' load case, the generic overstrength factor, Ωo is used. Create a '''separate''' load case to apply the individual factors, Ω-o,x and Ω-o,y.
3) Under the ''Design Situations'' tab, select the applicable overstrength Design Situation Type. Both LRFD and ASD methods are available (Image 03)
► Image | Overstrength Design Situations https://www.dlubal.com/en/img/033444
4) In the ''Load Combinations'' tab, verify that the correct factor(s) have been applied. Factors are also shown in the ''Result Combinations'' tab, if applicable. Click OK to exit (Image 04)
► Image | Verify the Overstrength Factor https://www.dlubal.com/en/img/033445
5) The final step is to assign the applicable limit state type to the overstrength design situation. For members '''without''' assigned seismic configuration, select the "Strength limit state" (LRFD or ASD) as the ''Limit State Type''.
For members '''with''' assigned seismic configuration, use “Earthquake limit state – overstrength” (LRFD or ASD) (Image 05)
► Image | Overstrength Limit State Type https://www.dlubal.com/en/img/033446
For more information, go to the FAQ page:
► https://www.dlubal.com/en-us/support-and-learning/support/faq/005320
Did you find this video helpful?
► Let us know in the comments if you like this video.
E-learning videos:
► RFEM 6 for beginners: https://www.youtube.com/playlist?list=PL8ofwN6MZdI_JsyH5qaHA1itUfXa7w8sR
► Programming with RFEM 6 and Python: https://www.youtube.com/playlist?list=PLx7dtCtXeyHWXCU3Q6NMHkKwRgWgLb-Da
► RFEM 6 tutorial with Rhino & Grasshopper: https://www.youtube.com/playlist?list=PLx7dtCtXeyHX5toT2EXyV5nvc0E0fHWKJ
Take advantage of our free support. Do you have any questions?
► Frequently Asked Questions (FAQ): https://www.dlubal.com/en/support-and-learning/support/faq
► Ask an individual question: https://www.dlubal.com/en/support-and-learning/support/ask-individual-question
► Knowledge Base: https://www.dlubal.com/en-US/support-and-learning/support/knowledge-base
Follow us and stay up to date:
► Subscribe to the Dlubal YouTube Channel: https://www.youtube.com/user/DlubalEN?sub_confirmation=1
► Instagram: https://www.instagram.com/dlubal_software/
► Are you also on Facebook? Follow us here: https://www.facebook.com/dlubal.software.english
Keywords
#DlubalFAQ #OverstrengthFactor #ASCE7 #LoadCombination #SeismicLoadCase #Earthquake #LimitStateType #DesignSituation #FrequentlyAskedQuestion #FAQAboutDlubalSoftware #QuestionAndAnswerToDlubalSoftware
,100/30 rule,ASCE 7 load combination,Dlubal FAQ,FAQ about Dlubal Software,Frequently Asked Question,Load combination,Orthogonal combination,Question and Answer to Dlubal Software,Seismic load,ltZdIRXFIEg,UCHf0NE9OLzjLHTnInUzRL_A, Knowledge, channel_UCHf0NE9OLzjLHTnInUzRL_A, video_ltZdIRXFIEg,Question:
How do I apply the ASCE 7 Orthogonal Directional Combination procedure (100% + 30% rule) to my seismic load in a static analysis?
Answer:
1) The default orthogonal combination factor is set to 0.3 (30%). This value can be changed by going to ''Edit Parameters of Edition'' in the ''Load Cases & Combinations'' (Image 1)
► Image | Orthogonal Combination Factor https://www.dlubal.com/en/img/033526
2) Under the ''Load Cases'' tab, create the seismic load cases in the X and Y directions with Qe as the ''Action Category''. Activate the 'Additional Settings| Consider X and Y independently' option. Then, specify the direction under the ''Additional Settings'' tab (Image 2)
► Image | Seismic Load Cases https://www.dlubal.com/en/img/033527
3) Under the ''Design Situations'' tab, select the ''Edit Combination Wizard'' button. In the ''Standard Options'' tab, make sure that the ''Include orthogonal combinations'' option is activated (Image 3)
► Image | Include Orthogonal Combinations Option https://www.dlubal.com/en/img/033528
4) The generated COs including the orthogonal combination factor are listed in the ''Load Combinations'' tab (Image 4)
► Image | Generated COs with Orthogonal Combination Factor https://www.dlubal.com/en/img/033529
For more information, go to the FAQ page:
► https://www.dlubal.com/en-us/support-and-learning/support/faq/005299
Did you find this video helpful?
► Let us know in the comments if you like this video.
E-learning videos:
► RFEM 6 for beginners: https://www.youtube.com/playlist?list=PL8ofwN6MZdI_JsyH5qaHA1itUfXa7w8sR
► Programming with RFEM 6 and Python: https://www.youtube.com/playlist?list=PLx7dtCtXeyHWXCU3Q6NMHkKwRgWgLb-Da
► RFEM 6 tutorial with Rhino & Grasshopper: https://www.youtube.com/playlist?list=PLx7dtCtXeyHX5toT2EXyV5nvc0E0fHWKJ
Take advantage of our free support. Do you have any questions?
► Frequently Asked Questions (FAQ): https://www.dlubal.com/en/support-and-learning/support/faq
► Ask an individual question: https://www.dlubal.com/en/support-and-learning/support/ask-individual-question
► Knowledge Base: https://www.dlubal.com/en-US/support-and-learning/support/knowledge-base
Follow us and stay up to date:
► Subscribe to the Dlubal YouTube Channel: https://www.youtube.com/user/DlubalEN?sub_confirmation=1
► Instagram: https://www.instagram.com/dlubal_software/
► Are you also on Facebook? Follow us here: https://www.facebook.com/dlubal.software.english
Keywords
#DlubalFAQ #ASCE7LoadCombination #LoadCombination #SeismicLoad #OrthogonalCombination #100/30Rule #FrequentlyAskedQuestion #FAQAboutDlubalSoftware #QuestionAndAnswerToDlubalSoftware
,Center Line,Central Axis,Dlubal FAQ,FAQ about Dlubal Software,Frequently Asked Question,Question and Answer to Dlubal Software,RFEM6,Shear Wall,Wall Axis,NYloQa-SHX0,UCHf0NE9OLzjLHTnInUzRL_A, , channel_UCHf0NE9OLzjLHTnInUzRL_A, video_NYloQa-SHX0,Question:
Can I create the central axes of walls in RFEM 6?
Answer:
To create the central axes of walls, proceed as follows:
# Select the '''Set Center Line''' option in the lower command bar.
# Click the opposite wall outlines one by one, whose center line you want to create.
► image | Creating Center Lines of Walls https://www.dlubal.com/en-US/img/053828
For more information, go to the FAQ page:
► https://www.dlubal.com/en-us/support-and-learning/support/faq/005625
Did you find this video helpful?
► Let us know in the comments if you like this video.
E-learning videos:
► RFEM 6 for beginners: https://www.youtube.com/playlist?list=PL8ofwN6MZdI_JsyH5qaHA1itUfXa7w8sR
► Programming with RFEM 6 and Python: https://www.youtube.com/playlist?list=PLx7dtCtXeyHWXCU3Q6NMHkKwRgWgLb-Da
► RFEM 6 tutorial with Rhino & Grasshopper: https://www.youtube.com/playlist?list=PLx7dtCtXeyHX5toT2EXyV5nvc0E0fHWKJ
Take advantage of our free support. Do you have any questions?
► Frequently Asked Questions (FAQ): https://www.dlubal.com/en/support-and-learning/support/faq
► Ask an individual question: https://www.dlubal.com/en/support-and-learning/support/ask-individual-question
► Knowledge Base: https://www.dlubal.com/en-US/support-and-learning/support/knowledge-base
Follow us and stay up to date:
► Subscribe to the Dlubal YouTube Channel: https://www.youtube.com/user/DlubalEN?sub_confirmation=1
► Instagram: https://www.instagram.com/dlubal_software/
► Are you also on Facebook? Follow us here: https://www.facebook.com/dlubal.software.english
Keywords
#DlubalFAQ #CentralAxis #ShearWall #WallAxis #CenterLine #RFEM6 #FrequentlyAskedQuestion #FAQAboutDlubalSoftware #QuestionAndAnswerToDlubalSoftware
,Design,Member Type,Result Beam,Section,Steel Joint,Surface,9xSijm347Tc,UCHf0NE9OLzjLHTnInUzRL_A, Knowledge, channel_UCHf0NE9OLzjLHTnInUzRL_A, video_9xSijm347Tc,In the Steel Joints add-on, you can use not only the usual member types of "Beam", "Truss", and so on, but also the member type of "Result Beam", as well as cross-sections from surface elements. You should select a suitable cross-section for the result beam and then define any member openings in the surface model using the member editor.
Did you find this video helpful?
► Let us know in the comments if you like this video.
E-learning videos:
► RFEM 6 for beginners: https://www.youtube.com/playlist?list=PL8ofwN6MZdI_JsyH5qaHA1itUfXa7w8sR
► Programming with RFEM 6 and Python: https://www.youtube.com/playlist?list=PLx7dtCtXeyHWXCU3Q6NMHkKwRgWgLb-Da
► RFEM 6 tutorial with Rhino & Grasshopper: https://www.youtube.com/playlist?list=PLx7dtCtXeyHX5toT2EXyV5nvc0E0fHWKJ
Further Information About Video:
► Dlubal Software Website: https://www.dlubal.com/en-US/support-and-learning/learning/videos/005119
Download a free trial version of our programs now:
► Download free 90-day trial: https://www.dlubal.com/en-US/downloads-and-information/free-trial-versions/download-trial-versions
Take advantage of our free support. Do you have any questions?
► Frequently Asked Questions (FAQ): https://www.dlubal.com/en/support-and-learning/support/faq
► Ask an individual question: https://www.dlubal.com/en/support-and-learning/support/ask-individual-question
► Knowledge Base: https://www.dlubal.com/en-US/support-and-learning/support/knowledge-base
Follow us and stay up to date:
► Subscribe to the Dlubal YouTube Channel: https://www.youtube.com/user/DlubalEN?sub_confirmation=1
► Instagram: https://www.instagram.com/dlubal_software/
► Are you also on Facebook? Follow us here: https://www.facebook.com/dlubal.software.english
Keywords
#SteelJoint #Design #MemberType #ResultBeam #Surface #Section
